Frequently Asked Questions

What is the typical tolerance for a CNC milled part?

Modern CNC machines can comfortably hold tolerances of +/- 0.005 inches (0.127 mm) in standard conditions. With precise thermal control, rigid setups, and high-end machinery, tolerances of +/- 0.0005 inches (0.0127 mm) or tighter are achievable.

Do I need to know G-code to operate a CNC?

While CAM (Computer-Aided Manufacturing) software generates the G-code automatically, a professional machinist must understand it. Knowing G-code allows operators to troubleshoot errors, make manual adjustments at the controller, and ensure safe machine operation.

What is the difference between CAD and CAM?

CAD (Computer-Aided Design) is used to design the 3D model of the part. CAM (Computer-Aided Manufacturing) is the software used to take that 3D model and generate the specific toolpaths and G-code needed for the machine to cut it.

Why use a 5-axis machine over a 3-axis?

5-axis machines reduce the need for multiple manual setups. A part that requires cutting on 5 different sides would need 5 separate fixturing setups on a 3-axis machine, introducing accumulated error. A 5-axis machine can reach 5 sides in a single setup, vastly improving precision and reducing cycle time.

What materials can be CNC machined?

Almost any solid material can be machined. Common metals include Aluminum (6061, 7075), Steels (Stainless, Carbon, Tool steel), Titanium, and Brass. Plastics like Delrin, PEEK, and Polycarbonate are also widely machined. Soft materials require different tooling and spindle speeds compared to hard metals.

What does 'Climb Milling' mean?

Climb milling is a cutting strategy where the tool rotates in the direction of the feed. It creates a thick chip upon entry and a thin chip upon exit, which reduces heat and produces a better surface finish. It requires a rigid machine with minimal backlash.

How often should cutting tools be replaced?

Tool life depends on the material being cut, the feed rates, the coating, and coolant usage. Professional environments use tool life management systems in the controller that track cutting minutes and automatically flag or swap tools when a predetermined wear limit is reached.

What is a Tombstone in CNC machining?

A tombstone is a tall, heavy, rectangular or hexagonal fixture block mounted on a Horizontal Machining Center (HMC). Workpieces are clamped to its vertical faces, allowing the machine to rotate the tombstone and machine multiple parts in a single cycle.